98 Custom E-grip troubles.
Joined: 21 August 2011
Posted: 21 August 2011 at 3:44pm
Ive been having a problem with my 98 Custom Platinum Edition with E-grip installed. I bought a used 98 Custom Pro off of a person on craigslist and then put the E-grip into my platinum edition. Everything with the actual board works perfectly. The selector works good, it powers up, I can hear the rod hitting the seer when I press the trigger. Ive taken the seer out of the 98 Custom Pro, the Seer spring, the trigger and also the e-trigger itself.
The problem im having is this: At first when I power up the gun it shoots fine, though it feels laggy , through more firing at the field eventually the seer will not lower at all, leaving the hammer in the cocked position all the time but I can hear the rod being pushed into the seer.
The gun im using has this: 98 Custom Platinum ACT , Rufus Dawg power tube, Tipmann Expansion chamber and I always use Co2 through the gun.
A few games into the field when I started having real problems I took the gun apart and found the seer spring laying inside one half of the clam shell. Now I do not know if it came when I took the gun apart or ?
Im thinking perhaps the SEER spring is worn, and simply flying off inside the gun with rapid fire on the e-grip. or Perhaps the seer itself needs to be replaced? Any thought is appreaciated.
Note: I have used this gun for the last few months with the RT mod in it and everything has worked perfectly. It seems the E-trigger is giving me trouble.
Edited by Nightz0rd - 21 August 2011 at 3:52pm
|Forum Jump||Forum Permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum