Tippmann Pneumatics Inc. Homepage
  FAQ FAQ  Forum Search   Register Register  Login Login

*EDIT: need a part 4 my impulse*

 Post Reply Post Reply
Author
FiLiPiNo_RiPpA View Drop Down
Member
Member
Avatar

Joined: 19 February 2005
Location: United States
Status: Offline
Points: 18
Post Options Post Options   Thanks (0) Thanks(0)   Quote FiLiPiNo_RiPpA Quote  Post ReplyReply Direct Link To This Post Topic: *EDIT: need a part 4 my impulse*
    Posted: 15 March 2005 at 3:11pm

alright I have an impulse and well my friend wuzz dumb and try screwing a co2 tank in there and near the lpr it made some sound like crrrrrrrrrrrrrrrrrrrrr.......... and stuff so i unscrewed do i just need my imp fixed or iz it cuzz co2 is too high pressured and my imp gauge says 300 so its low pressure???? well any help would be appreciated

 

and heres a pic of my impulse

EDIT::::::::::::::::::::::::::::::::::::::::::::::::::::::

yeh the part is a valve seat locator, I found sites that sell teh valve but do they need a valve seat locator to work cuzz i havent found on on them



Edited by FiLiPiNo_RiPpA
If the end is the start then where does it end.....
Back to Top
triggerhappy1 View Drop Down
Platinum Member
Platinum Member
Avatar

Joined: 07 May 2004
Location: United States
Status: Offline
Points: 3376
Post Options Post Options   Thanks (0) Thanks(0)   Quote triggerhappy1 Quote  Post ReplyReply Direct Link To This Post Posted: 15 March 2005 at 3:21pm
Co2 is fine for Impulses. The full 800psi+ is regulated down to 300psi by the regulator. Impulses run good on Co2.
Back to Top
FiLiPiNo_RiPpA View Drop Down
Member
Member
Avatar

Joined: 19 February 2005
Location: United States
Status: Offline
Points: 18
Post Options Post Options   Thanks (0) Thanks(0)   Quote FiLiPiNo_RiPpA Quote  Post ReplyReply Direct Link To This Post Posted: 15 March 2005 at 5:32pm
so then wats wrong with my impulse lol it makes a leak sound weneva i put a co2 tank in it???
If the end is the start then where does it end.....
Back to Top
triggerhappy1 View Drop Down
Platinum Member
Platinum Member
Avatar

Joined: 07 May 2004
Location: United States
Status: Offline
Points: 3376
Post Options Post Options   Thanks (0) Thanks(0)   Quote triggerhappy1 Quote  Post ReplyReply Direct Link To This Post Posted: 15 March 2005 at 5:48pm

Where do you say the sound is coming from? It sounds like a leak or bad o-ring. It could be from the fittings, or macro. So find the leak using some soapy water, and reseal whats leaking with some teflon tape or whatever is appropriate.

Back to Top
FiLiPiNo_RiPpA View Drop Down
Member
Member
Avatar

Joined: 19 February 2005
Location: United States
Status: Offline
Points: 18
Post Options Post Options   Thanks (0) Thanks(0)   Quote FiLiPiNo_RiPpA Quote  Post ReplyReply Direct Link To This Post Posted: 17 March 2005 at 2:45pm
ok i stopped the link on the lpr with sum tanks 2 some teflon but now i hear it in the ram is any help???
If the end is the start then where does it end.....
Back to Top
Impulsive View Drop Down
Member
Member


Joined: 16 March 2005
Status: Offline
Points: 86
Post Options Post Options   Thanks (0) Thanks(0)   Quote Impulsive Quote  Post ReplyReply Direct Link To This Post Posted: 17 March 2005 at 4:02pm
Put an antisiphon on the tank along with an on/off immediately.

300PSI?  Man, make the dwell time longer and lower the pressure.
Cockers are like stick shifts, after a few transmissions you get the hang of them.
Back to Top
FiLiPiNo_RiPpA View Drop Down
Member
Member
Avatar

Joined: 19 February 2005
Location: United States
Status: Offline
Points: 18
Post Options Post Options   Thanks (0) Thanks(0)   Quote FiLiPiNo_RiPpA Quote  Post ReplyReply Direct Link To This Post Posted: 17 March 2005 at 5:01pm
yeh i just found that out but big question i just realized that my impulse is missing the valve the guy who sold it 2 me didnt have one inside the end cap i see a few sites that sell new valves for the impulse but do they need that part called the valve seat locator 2 work bcuzz they dotn show one with them
If the end is the start then where does it end.....
Back to Top
xXxMidgeTxXx View Drop Down
Member
Member


Joined: 05 March 2004
Location: United States
Status: Offline
Points: 286
Post Options Post Options   Thanks (0) Thanks(0)   Quote xXxMidgeTxXx Quote  Post ReplyReply Direct Link To This Post Posted: 17 March 2005 at 6:53pm
Originally posted by triggerhappy1 triggerhappy1 wrote:

Co2 is fine for Impulses. The full 800psi+ is regulated down to 300psi by the regulator. Impulses run good on Co2.
No. co2 should NOT be used on Impulses unless the tank has an anti-syphon tube that is fitted to the gun. If you use a pin-valve co2 on an Impulse you should have an inline on/off valve for gassing/degassing problems.
Black 2k3 Impulse
My Photography
My Forums
Back to Top
FiLiPiNo_RiPpA View Drop Down
Member
Member
Avatar

Joined: 19 February 2005
Location: United States
Status: Offline
Points: 18
Post Options Post Options   Thanks (0) Thanks(0)   Quote FiLiPiNo_RiPpA Quote  Post ReplyReply Direct Link To This Post Posted: 18 March 2005 at 2:45pm
yeh thanks but wats that part inside the impulse that holds the valve in its like a screw and i dont noe where i can order one??? its called a valve seat locator i tink???
If the end is the start then where does it end.....
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 10.03

This page was generated in 0.172 seconds.